Pneumatic straight grinding machine Dynabrade 52692

  • Exhaust air at the rear end 
  • Extremely high torque due to reduced gear 
  • As standard, all models are equipped with safety levers.
  • The handle is plastic covered to reduce the generation of cold and vibrations.
  • Standard 6mm collet chuck 
  • Constant speed even when under load 

Collet chucks for diameters of 3, 8, and 10mm can be optionally used. 

Technical data    
Model number 52692 52693
Motor capacity 744 W 744 W
Number of revolutions per min. 3,400 4,500
Noise level 80 dB(A) 80 dB(A)
Air consumption 1200 L/min. 1200 L/min.
Weight 1.9 kg 1.9 kg
Length 423 mm 423 mm
Diameter 48 mm 48 mm
  • Exhaust air at the rear end
  • As standard, all models are equipped with safety levers. 
  • The handle is plastic covered to reduce vibrations and the generation of cold.
  • Standard 6 mm collet chuck 
  • Constant speed even when under load 
Technical data      
Model number 52695 52696 52697
Motor capacity 744 W 744 W 744 W
Number of revolutions per min. 9,000 12,000 15,000
Noise level 82 dB(A) 83 dB(A) 80 dB(A)
Air consumption 1000 L/min. 1050 L/min. 1100 L/min.
Weight 1.5 kg 1.5 kg 1.5 kg
Length 359 mm 359 mm 390 mm
Diameter 48 mm 48 mm 48 mm
Technical data    
Model number 52698 52699
Motor capacity 744 W 744 W
Number of revolutions per min. 18,000 20,000
Noise level 81 dB(A) 80 dB(A)
Air consumption 1130 L/min. 1250 L/min.
Weight 1,5 kg 1,5 kg
Length 390 mm 390 mm
Diameter 48 mm 48 mm

Collet chucks for diameters of 3, 8, and 10mm can be optionally used.

 

  • Legend
  • working with metal
  • working with wood
  • working with plastic
  • working with varnish

Service and advice

Phone: +49-(0) 6232-3148-0

Send e-mail

Technical contact

Oliver Broßmann

Phone:
+49 (0)6232-3148-20

Send e-mail